Temperature logging in hospitality: which temperatures apply?

Short answer

Commonly used limits in Dutch hospitality are: chilled products at most 7 °C, frozen products at -18 °C or colder, hot holding at least 60 °C, and the same limits for chilled and frozen goods on delivery. Which limits and check frequencies apply to you is set out in the current Hygiënecode voor de horeca from KHN. Always check it, because some products have stricter requirements.

Note: this article gives a practical overview of commonly used limits. It does not replace the hygiene code. The Hygiënecode voor de horeca from KHN is leading; a new version applies from 1 April 2027. Always check the current text via khn.nl/kennis/hygienecode (in Dutch).

Why does temperature matter so much?

Harmful bacteria can grow mainly at temperatures between roughly 7 °C and 60 °C. By keeping chilled food cold, hot food hot and passing quickly through that zone when cooling down and reheating, you limit growth. That is why chilling, cooking, hot holding and cooling down are critical points in almost every professional kitchen, where you measure and record.

During an inspection, the NVWA measures the temperature in fridges and hot-holding equipment and asks for a (digital) core thermometer. See how an NVWA inspection works (in Dutch).

Which temperatures apply in hospitality?

Below are limits commonly used in Dutch hospitality. Treat them as guidance and check them against the current hygiene code and your supplier’s storage instructions.

Commonly used temperature limits in hospitality (check the current hygiene code)
MomentCommonly used limitWhat to watch
FridgeAt most 7 °CSome products need a lower temperature; follow the label. In one of its tips, KHN advises setting the fridge to 4 °C so you have a margin.
Freezer-18 °C or colderA short rise while loading or defrosting is normal; structurally warmer is a deviation.
Hot holdingAt least 60 °CMeasure the core temperature of the product, not just the bain-marie setting.
CookingA core temperature of at least 75 °C is a commonly used limitCertain methods (such as sous-vide) have their own rules in the code.
Cooling downQuickly from hot to chilled, within the time the code prescribesUse shallow containers and cool actively; record start and end time.
Goods receiptChilled at most 7 °C, frozen -18 °CIf it deviates: refuse or contact the supplier straight away, and record it.

How often should you measure and record temperatures?

The hygiene code decides. KHN says recording at critical control points is mandatory and that the frequency is in the code. In practice many businesses agree fixed moments, for example at opening and halfway through the shift. More important than the exact moment is that it really happens every day and isn’t filled in at the end of the week.

Tip: link measurements to something that happens anyway, such as the start of a shift or the arrival of a delivery. In HACCP Maatje, staff get reminders based on the Eitje roster, for example for temperatures halfway through the shift.

How do you measure temperature properly?

  • Use a suitable thermometer. For core temperatures you need a (digital) core thermometer.
  • Calibrate regularly. KHN has an instruction video on calibrating. A thermometer that is a few degrees off makes all your records unreliable.
  • Measure the product, not just the air. A fridge display tells you about the air; a product in the middle of the fridge tells you more.
  • Don’t measure right after opening the door or loading a delivery, but do write down what you see.
  • Clean the probe between measuring different products, to prevent cross-contamination.

What do you do when a temperature is off?

A deviation isn’t a disaster, as long as you notice it and act. A practical approach:

  1. Measure again, ideally with a second thermometer or in a product.
  2. Check the cause: is the door open, is the fridge overloaded, just loaded or defrosting?
  3. Assess the products according to the hygiene code: how long and how warm? If in doubt, throw it out.
  4. Record what you measured, what you did and who did it.
  5. Follow up: have the fridge checked if it happens more often.

In HACCP Maatje you record a deviation with a photo and follow up the action item until it is resolved. So you can still see later what happened.

Recording temperatures: paper or app?

A paper sheet per fridge works, as long as it is filled in every day and you can find it again. The downside: nobody reminds you, initials are hard to verify afterwards and there is no overview across fridges or locations.

With HACCP Maatje your team records per fridge or freezer unit. Optionally, a staff member takes a photo of the thermometer; the app suggests the reading and the staff member confirms. That gives you photo evidence for every reading. Read more in HACCP app vs paper lists or see the features.

Frequently asked questions

What is the maximum fridge temperature in hospitality?

A commonly used limit is 7 °C at most for chilled products. Some products need a lower temperature. Check the current Hygiënecode voor de horeca and the product label.

How cold should a freezer be?

A commonly used limit is -18 °C or colder. A short rise while loading or defrosting is fine; structurally warmer is a deviation you record and fix.

At what temperature should food be kept hot?

A commonly used limit is at least 60 °C, measured in the core of the product. Check the hygiene code for the exact requirements.

How long should I keep temperature records?

KHN says that at least six months of records gives you enough information in case of an incident. Some records have a longer period; check the hygiene code.